Table of Contents
Advertisement
Quick Links
• 1/3" 960H High Density Double Scan Sony CCD
• 750 TVL High Resolution
• WDR - Wide Dynamic Range (Selected Models)
• True Day/Night by ICR
• IR Corrected Lens Options Lens options: 2.8-10mm and
9-22mm
• XD-DNR (2D+3D DNR) Noise Reduction
• Polygon Masking with 15 Programmable Zones
• OSD (On Screen Display) for Camera Setup
• Flush or Surface mount with included adaptor
• Defog video enhancement processing
• Ultra Versatile Design with Infinity Ball Mount for Any
Viewing Angle
• UTC CONTROL - Serial Control over Coax
• Secondary Video Output (Cable Included)
• Optional UTP Interface Available
• Fully Gasket Sealed with an IP-68 Water tight NEMA Rating
(Vandal Resistant Versions)
• Optional Heater / Blower Options Available (Vandal
Resistant Versions)
• Standard (-40°F) and Extreme Cold (-60°F) Temperature
Kits Available (Vandal Resistant Versions)
• Available in Ivory or Black
• 12VDC / 24VAC Dual Voltage Operation
MIGHTY DOME
960H Cameras
750 TVL Dome Cameras Series
Advertisement
Table of Contents
Related Manuals for Vitek VTD-MS2810DN
Summary of Contents for Vitek VTD-MS2810DN
- Page 1 MIGHTY DOME 960H Cameras 750 TVL Dome Cameras Series • 1/3” 960H High Density Double Scan Sony CCD • 750 TVL High Resolution • WDR - Wide Dynamic Range (Selected Models) • True Day/Night by ICR • IR Corrected Lens Options Lens options: 2.8-10mm and 9-22mm •...
-
Page 2: Table Of Contents
VANDAL WDR DOME SPECIFICATIONS ........30 INDOOR DAY/NIGHT DOME SPECIFICATIONS ......31 VANDAL DAY/NIGHT DOME SPECIFICATIONS ......32 IR DOME SPECIFICATIONS ............33 DIMENSIONS ................34 OTHER PRODUCTS FROM VITEK ..........35 OTHER PRODUCTS FROM VITEK ..........36 WARRANTY .................. 37... -
Page 3: Box Contents
BOX CONTENTS 1) Mighty Dome Camera 2) Accessories 3) VT-MD-2VOC (Secondary Video Output Cable) 4) Instruction Manual & Mounting Template INCLUDED ACCESSORIES Torx Wrench - (Vandal & IR Versions Only) Type #: T20 Length: 63mm / Diameter: 4mm Qty: 1 Phillips head Screws - (Vandal &... -
Page 4: Available Models/Accessories
AVAILABLE MODELS / ACCESSORIES Indoor MIghty doMe ConfIguratIons: VTD-MS2810DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/2.8-10mm Lens, OSD, ICR and “Night Watch” DSS -12VDC/24VAC (Ivory or Black) VTD-MS922DN: 960H - Indoor Effio-A Powered Day/Night Mighty Dome 750TVL Camera w/9- 22mm Lens, OSD, ICR and “Night Watch”... -
Page 5: Mighty Dome Layout
MIGHTY DOME LAYOUT 1) Lens 8) Dome Cover Ring 2) Power Input Connector(12VDC / 9) Flush Mount Base 24VAC) 10) Surface Mount Base 3) Video Output Connector - BNC 11) Assembly Screws - Torx M4x9 4) Camera Holder and 2nd Video (Vandalproof) output 12) Assembly Screws - Phillips... -
Page 6: Installation
INSTALLATION 1) Dome Cover 1.1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal proof screws and remove the dome cover. 1.2 Indoor Domes - Turn the dome cover to the left to remove the dome cover. 2) Flush Mount Installation: Using four St4x30 screws, attach the flush mount base to a sturdy surface. -
Page 7: Junction Box Installation
JUNCTION BOX INSTALLATION Mighty Domes can easily be flush or surface mounted to an electrical junction box (4-11/16 in. Square Boxes, 2-1/8 in. Deep - Welded with Conduit KO’s) using the pre-drilled mounting holes on either the surface mount housing or the the flush mount base. -
Page 8: Connections
CONNECTIONS • Power connection: 12VDC or 24VAC dual input. • All Mighty Dome cameras come standard with a secondary video output. The secondary video cable (VT-MD-2VOC) is included in the box. VTM-LCD... -
Page 9: Lens Adjustment
LENS ADJUSTMENT 1) Loosen Zoom & Focus screws and make necessary adjustments as shown. Field of view: Telephoto(T) to Wide(W) Focus: Near(N) to infinity( ) 2) OSD Joystick Control... -
Page 10: 3-Axis Gimbal Adjustment
3-AXIS GIMBAL ADJUSTMENT The Gimbal mechanism yields maximum rotation and placement as shown below. Remove... -
Page 11: Wdr Mighty Dome Features
MIGHTY DOME FEATURES OSD menu Startup Press the ‘OSD menu SET key’ down to access the setup menu mode. • : Selects previous page or next page. • EXIT : Enters ‘EXIT’ menu. • RETURN : Returns to the previous menu. SETUP MENU SETUP MENU 1 / 2... - Page 12 OSD MENU FEATURES/SETUP WDR for V-Series, ATR-EX for A-Series WDR / ATR-EX SCENE SELECT LEVEL AUTO DAY/NIGHT BURST CNTL SIGNAL EXT1 DELAY CNT DAY->NIGHT NIGHT->DAY IR OPTIMIZER MODE AUTO IR AREA LEVEL IR LED DAY/NIGHT COLOR NIGHT ON/OFF OFF (default) LENS SHD COMP PATTERN SET1/2/3...
- Page 13 OSD MENU FEATURES/SETUP PRIVACY MASK TRANSP MOSAIC MOTION DET DETECT SENSE INTERVAL BLOCK DISP MASK AREA MONITOR AREA AREA SEL AREA MODE BOTTOM LEFT RIGHT TYPE LENS AUTO SYS SETTING AUTO MODE ADJUST SPEED FLIP OFF / V / H / HV LCD / CRT OFF / ON CAMERA ID...
-
Page 14: Scene Select
OSD MENU FEATURES/SETUP OSD menu Setup Press the OSD menu SET key down to access the setup menu mode. SETUP MENU ADVANCED MENU 1 / 2 1 / 2 SCENE SELECT FULL AUTO AUTO SHUTTER/AGC PICT ADJUST WHITE BAL EZOOM HLC/BLC WDR/ATR-EX PRIVACY MASK... - Page 15 OSD MENU FEATURES/SETUP 1-1-3. FIX Video level is fixed in any conditions by the setting of SHUTTER, AGC MAX. 1-2. WHITE BAL Ability to set the WHITE BALANCE mode. 1-2-1. ATW (Auto Trace White Balance): Automatically tracks the changes of color temperature and continuously adjusts the white balance.
- Page 16 OSD MENU FEATURES/SETUP > INDOOR : Optimized for Indoor installation and more easily compensates ATW for low color temperature such as incandescent lights. > SUNNY : Optimized for outdoor sunlight applications and more easily compensates ATW for high color temperature such as sunlight. >...
- Page 17 OSD MENU FEATURES/SETUP 1-3-2. HLC: HLC clips out the highlight (bright) area and masks it as black color. Video will be clipped out and masked for the area which exceeds CLIP LEVEL. • CLIP LEVEL (default: 10): Defines the threshold level for HLC. Lower value is more sensitive. 1-3-3.
- Page 18 OSD MENU FEATURES/SETUP 1-6. DAY/NIGHT This function is used to control the setting during day-time and night-time operation. 1-6-1. AUTO AUTO mode in DAY/NIGHT is used only for a camera which does not have a light sensor. Camera switches DAY from/to NIGHT automatically according to the amount of light through the lens.
- Page 19 OSD MENU FEATURES/SETUP • NIGHT -> DAY (default: 120) NIGHT→DAY is a threshold level which determines to switch from NIGHT to DAY. Lower(Higher) value makes the camera switch from Night to Day at lower (higher) illumination. If it stays in Night(B/W) mode in day time, decrease NIGHT-> DAY threshold value until it just switches to Day * Examine and verify Day/Night operation according to IMPORTANT ACTIVITY 1-6-2.
- Page 20 OSD MENU FEATURES/SETUP 1-7. IR OPTIMIZER This function is effective for built-in LED models in NIGHT mode only. If subjects which can cause overexposure are located near the monitored area, you can adjust IR OPTIMIZER level or area. IR OPTIMIZER SETUP IR LED AUTO MODE AUTO...
-
Page 21: Picture Adjustment
OSD MENU FEATURES/SETUP 1-8. LENS SHD COMP (default: OFF) This function is used to caculate the compensation data for lens shading. Convex shape of the lens causes the light to enter the camera unevenly and typically makes the center of the screen brighter than the rest. It is used to compensate for this undesirable effect and make the screen more even. -
Page 22: Electronic Zoom
OSD MENU FEATURES/SETUP 2-1. BRIGHTNESS (default: 120): Increases or decreases the brightness of the picture. This is different from that of DC iris lens and simply increases or decreases the digital gain of video. Do not increase this too much, the dynamic range for the highlight area will decrease. -
Page 23: Privacy Mask
OSD MENU FEATURES/SETUP 5. PRIVACY MASK Sets ON/OFF for enabling/disabling PRIVACY. Up to 15 privacy areas are available and each area is programmable in size and location. The number of privacy areas is limited to four when MOTION DET > MONITOR AREA is ON. -
Page 24: Motion Detection
OSD MENU FEATURES/SETUP 6. MOTION DET Up to 4 motion detection areas are available and each area is programmable in size and location. The motion is displayed by means of blocks when MOTION DET and MOTION DET>BLOCK DISP are ON. MOTION DETECTION DETECT SENSE INTERVAL... -
Page 25: System Setting
OSD MENU FEATURES/SETUP 6-5. MONITOR AREA Sets the MOTION DETECTION area on screen. MONITOR AREA AREA SEL AREA MODE BOTTOM LEFT RIGHT RETURN 6-5-1. AREA SEL (default: 1/4) : Selects one of AREA1~AREA4 to be adjusted. Each area is displayed with the color. AREA1-Red, AREA2-Green, AREA3- Blue, AREA4-Yellow 6-5-2. - Page 26 OSD MENU FEATURES/SETUP 7-1. LENS Selects the lens type, AUTO or MANUAL. AUTO supports DC auto-iris lens only. 7-1-1. AUTO • TYPE (default: DC): This camera does NOT support video type auto iris lens. MUST BE SET TO DC ONLY. •...
-
Page 27: Language
OSD MENU FEATURES/SETUP 7-4. CAMERA ID Set ON/OFF for enabling/disabling of ID display. Factory default ID is Software version of camera. User programmed camera ID will be lost and restored with factory default ID by CAMERA RESET. Up to 40 characters can be input for camera ID. CAMERA ID SETUP VER-DN1.0 CAMERA ID input line... -
Page 28: Maintenance
OSD MENU FEATURES/SETUP 10. MAINTENANCE Set the OSD menu user environments and Camera reset. MAINTENANCE MANUAL W.PIX MASK CAMERA RESET RETURN 10-1-1. MANUAL COMP : Setting for white pixel(defective pixels) compensation manually. • REGISTRATION : Detects each white pixel using the cursor. •... -
Page 29: Exit
OSD MENU FEATURES/SETUP 10-2. CAMERA RESET This function is used to reset to the factory defaults of the camera settings. 11. EXIT Exits SETUP MENU and returns to the normal display. 11-1. SAVE : Save all the setting before exiting the setup menu. 11-2. -
Page 30: Indoor Wdr Dome Specifications
INDOOR WDR SPECIFICATIONS Detailed Specifications VTD-MS2810WDR VTD-MS922WDR Image Device 1/3” 960H High Density Double Scan Sony CCD w/Effio-V Resolution 750TV Lines Effective Pixels 976(H) x 494(V) Minimum Illumination 0.0001 Lux (F1.2@40 IRE, DSS x4) Lens Options 2.8-10mm 9-22mm Day/Night True Day/Night by ICR Noise Reduction XD-DNR (2D+3D DNR) Motion Detection... -
Page 31: Vandal Wdr Dome Specifications
VANDAL WDR SPECIFICATIONS Detailed Specifications VTD-MVS2810WDR VTD-MVS922WDR Image Device 1/3” 960H High Density Double Scan Sony CCD w/Effio-V Resolution 750TV Lines Effective Pixels 976(H) x 494(V) Minimum Illumination 0.0001 Lux (F1.2@40 IRE, DSS x4) Lens Options 2.8-10mm 9-22mm Day/Night True Day/Night by ICR Noise Reduction XD-DNR (2D+3D DNR) Motion Detection... -
Page 32: Indoor Day/Night Dome Specifications
INDOOR DAY/NIGHT SPECIFICATIONS Detailed Specifications VTD-MS2810DN VTD-MS922DN VTD-MS1850DN Image Device 1/3” 960H High Density Double Scan Sony CCD w/Effio-A Resolution 750TV Lines Effective Pixels 976(H) x 494(V) Minimum Illumination 0.0005Lux (Sens-up OFF) 9-22mm Lens Options 2.8-10mm 18-50mm True Day/Night by ICR... -
Page 33: Vandal Day/Night Dome Specifications
VANDAL DAY/NIGHT SPECIFICATIONS Detailed Specifications VTD-MVS2810DN VTD-MVS922DN VTD-MVS1850DN Image Device 1/3” 960H High Density Double Scan Sony CCD w/Effio-A Resolution 750TV Lines Effective Pixels 976(H) x 494(V) Minimum Illumination 0.0005Lux (Sens-up OFF) Lens Options 2.8-10mm 9-22mm 18-50mm Day/Night True Day/Night by ICR D-WDR by ATR-EX2 XD-DNR (2D+3D DNR) Noise Reduction... -
Page 34: Ir Dome Specifications
IR SPECIFICATIONS Detailed Specifications VTD-MVS2810/L35 VTD-MVS922/L35 VTD-MVS1850/L35 Image Device 1/3” 960H High Density Double Scan Sony CCD w/Effio-A Resolution 750TV Lines Effective Pixels 976(H) x 494(V) Minimum Illumination 0.0005Lux (Sens-up OFF) / 0 Lux w/IR ON 9-22mm Lens Options 2.8-10mm 18-50mm 35 IR LED’s with up to 120’... -
Page 35: Dimensions
DIMENSIONS Indoor Vandal... -
Page 36: Other Products From Vitek
OTHER PRODUCTS FROM VITEK VTC-C960DS / VTC-C960WS 750 TVL 960H True Day/Night CCD Cameras w/Effio-A/V Processing • VTC-C960DS: 750 TVL 960H True Day/Night CCD Camera w/Effio-A Processing • VTC-C960WS: 750 TVL 960H WDR Day/Night CCD Camera w/Effio-V Processing • 1/3” High density Sony CCD (960H) •... -
Page 37: Other Products From Vitek
OTHER PRODUCTS FROM VITEK SPIRE Elite Series 960H Digital Video Recorders VT-SRE Series Spire Series 4, 8, & 16 Channel 960H Digital Video Recorders • Supports High Resolution 960H Cameras • 4, 8 or 16 Video Inputs with 1 HDMI, 1 Spot Monitor Output and 1 VGA output •... -
Page 38: Warranty
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.