Table of Contents
Advertisement
Quick Links
• 1/3" High Density Sony Super HAD CCD (960H) w/
Effio-A DSP
• 750 TV Lines of Resolution (960H)
• E-WDR by ATR-EX (Adaptive Tone Reproduction)
• Lens Shading Compensation
• 24 Dynamic Infrared LEDs with up to 65' Range
• 0.003 Lux / 0 Lux with IR LEDs On
• IR Corrected 3.6mm Electronic Iris Lens / Smart IR /
Mirror
• D-WDR / Backlight & Hightlight Compensation
• 3DNR Noise Reduction
• Privacy Masking / Motion
• ATW / Push / User1 / User2 / MANUAL / Push Lock
• OSD (On Screen Display) menu and Camera ID
• 3-Axis Concealed Bracket
• IP-67 Rated Water Resistance
• Cable Feed Through Mount for tamper resistance
• 12 VDC Operation
VTC-IRA24F
Day/Night 960H Infrared
Bullet Camera
Advertisement
Table of Contents
Related Manuals for Vitek VTC-IRA24F
Summary of Contents for Vitek VTC-IRA24F
- Page 1 VTC-IRA24F Day/Night 960H Infrared Bullet Camera • 1/3” High Density Sony Super HAD CCD (960H) w/ Effio-A DSP • 750 TV Lines of Resolution (960H) • E-WDR by ATR-EX (Adaptive Tone Reproduction) • Lens Shading Compensation • 24 Dynamic Infrared LEDs with up to 65’ Range •...
- Page 2 VTC-IRA24F VTC-BRE24F / VTC-IRE24F The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
-
Page 3: Table Of Contents
VTC-IRA24F TABLE OF CONTENTS Warnings ........3 Precautions ........4 Features ......... 5 OSD Setup Menu Tree....6 Setup Menu (OSD) ......11 1. Scene Select ......12 1.1 Shutter/AGC ..12 1.2 White Bal .....13 1.3 HLC/BLC .....14 1.4 ATR/EX ....15 1.5 DNR .....15... -
Page 4: Warnings
VTC-IRA24F Warnings The camera needs periodic inspection. • Contact an authorized technician for inspection. Stop using camera if there is a malfunction. • If your using your camera around smoke or inusual heat for a long time, fire may be caused. -
Page 5: Precautions
VTC-IRA24F Precautions Ø Do not install the camera in extreme temperature conditions. • Only use the camera under conditions where temperatures are between -14˚F and +122˚F. • Be especially careful to provide ventilation when operating under high temperatures. Ø Do not drop the camera or subject it to physical shocks. -
Page 6: Features
VTC-IRA24F FEATURES • 1/3” High Density Sony Super HAD CCD (960H) w/Effio-A DSP • High Resolution of 750 TVL • E-WDR by ATR-EX (Adaptive Tone Reproduction) • 24 Dynamic Infrared LEDs with up to 65’ Range • 0.003 Lux / 0 Lux with IR LEDs On •... -
Page 7: Osd Setup Menu Tree
VTC-IRA24F OSD MENU TREE [OSD Setup Menu] SETUP SCENE SELECT PICT ADJUST EZOOM PRIVACY MASK MOTION DET SYS SETTING LANGUAGE VERSION MAINTENANCE EXIT SUB MENU Ⅱ SUB MENU Ⅰ MAIN MENU ADJUSTMENT AE LEVEL 1 ~ 250 AGC MAX 6 ~ 44.8 DB... - Page 8 VTC-IRA24F OSD MENU TREE SUB MENU Ⅱ SUB MENU Ⅰ MAIN MENU ADJUSTMENT CONTRAST LOW / MID / HIGH CLEAR FACE OFF / LOW / MID / HIGH ATR-EX RETURN LEVEL 0 ~ 6 RETURN BURST ON / OFF CNTL SIGNAL...
- Page 9 VTC-IRA24F OSD MENU TREE SUB MENU Ⅰ SUB MENU Ⅱ MAIN MENU ADJUSTMENT PATTERN SET 1 ~ 3 POSH 0 ~ 959 POSV 0 ~ 959 OFF / IR SHADE COMP LOW / LEVEL MID / IR OPTIMIZER HIGH RETURN...
- Page 10 VTC-IRA24F OSD MENU TREE SUB MENU Ⅰ SUB MENU Ⅱ MAIN MENU ADJUSTMENT ON / OFF AREA SEL 1/15 ~ 15/15 DISPLAY ON / OFF POSITION PRIVACY MASK COLOR BLUE / YELLOW / CYAN / MAGENTA / WHITE / BLACK / RED / GREEN TRANSP 0.00 ~ 1.00...
- Page 11 VTC-IRA24F OSD MENU TREE SUB MENU Ⅰ SUB MENU Ⅱ MAIN MENU ADJUSTMENT FLIP V / H / HV / OFF LCD/CRT LCD / CRT PROTOCOL PELCO-D ADDRESS 1 ~ 255 BAUDRATE 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200...
-
Page 12: Setup Menu (Osd)
VTC-IRA24F SETUP MENU (OSD) [HOW TO OPERATE OSD JOYSTICK] [OSD SET UP] Press Enter button of the OSD Joystick to enter into OSD main menu. -
Page 13: Scene Select
VTC-IRA24F SETUP MENU (OSD) 1. SCENE SELECT You can select options according to the environment: FULL AUTO, INDOOR, OUTDOOR, BACKLIGHT, ITS (Traffic Monitoring) and CUSTOM (User defined). 1.1. SHUTTER/AGC This function can set the SHUTTER/AGC level to AUTO, MANUAL or FIX. -
Page 14: White Bal
VTC-IRA24F SETUP MENU (OSD) 1.2. WHITE BAL You can choose from different white balance modes: ATW, PUSH, USER1, USER2, MANUAL and PUSHLOCK. Only when you choose the CUSTOM mode in the SCENE SELECT menu will the ‘WHITE BALANCE’ sub-menu ATW/ PUSH/ USER1/ USER2/ MANUAL/PUSH LOCK appear, you can now adjust the mode. -
Page 15: Hlc/Blc
VTC-IRA24F SETUP MENU (OSD) 1.3. HLC/BLC HLC (HIGHLIGHT COMPENSATION) This function is used to black out highlighted areas in order to enable a clear visual image of objects, such as the license plates of an oncoming vehicle or other objects that may be obstructed by bright headlamps. -
Page 16: Atr/Ex
VTC-IRA24F SETUP MENU (OSD) 1.4. ATR-EX (Adaptive Tone Reproduction-EX) Set to enable or disable ATR (Adaptive Tone Reproduction) compensation for a better dynamic range (D-WDR) of the image. This function provides gradation compensation to improve the contrast of subjects whose gradation has been lost in cases where both low-luminance and high-luminance areas exist in the same picture. -
Page 17: Day/Night
VTC-IRA24F SETUP MENU (OSD) 1.6. DAY/NIGHT Day/night function is for the user to use the camera for different occasions. There are three modes, DAY, NIGHT and AUTO DAY/NIGHT DESCRIPTION This function controls the camera output Color or B&W image according to the strength of the light. -
Page 18: Ir Optimizer
VTC-IRA24F SETUP MENU (OSD) 1.7. IR OPTIMIZER This is a useful function for IR LED cameras in night mode only. If subjects which can cause overexposure are located near the monitored area, you can adjust IR OPTIMIZER level or area by Selecting ON or OFF. -
Page 19: Pict Adjust
VTC-IRA24F SETUP MENU (OSD) 2. PICT ADJUST PIC ADJUST DESCRIPTION Increases or decreases the brightness of the picture. BRIGHTNESS Do not increase this too much this will cause the dynamic range for the highlighted areas to decrease. Adjust the strength of the image Contrast. If Contrast is set to too high, the CONTRAST dark area may lose detail and the high luminance area may be saturated. -
Page 20: Ezoom
VTC-IRA24F SETUP MENU (OSD) 3. EZOOM Sets the maximum digital zoom magnification. E.ZOOM function enlarges the pixel itself, which can cause deterioration of the picture quality. You can setup according to the needs of area size and position. EZOOM DESCRIPTION MAG is the magnification ratio of the electronic zoom. -
Page 21: Privacy Mask
VTC-IRA24F SETUP MENU (OSD) 5. PRIVACY MASK Sets ON/OFF for enabling/disabling PRIVACY. Up to 15 privacy areas are available and each area is programmable in size, position, color and transparency of the chosen area. The privacy areas are masked with the color selected by PRIVACY MASK>COLOR. -
Page 22: Motion Detection
VTC-IRA24F SETUP MENU (OSD) 6. MOTION DETECTION Up to 4 Motion Detection areas are available settings include DETECTION SENSE / INTERVAL / BLOCK DISP / MASK AREA / MONITOR AREA and each area is programmable in size and location. MOTION DETECTION DESCRIPTION Adjust the sensitivity level for detecting motion. -
Page 23: Sys Setting
VTC-IRA24F SETUP MENU (OSD) 7. SYS SETTING SYS SETTING DESCRIPTION Selects the lens type: AUTO or MANUAL. LENS AUTO • Use to inverse the pictures coming from the camera. V : Vertical Flips the video signal vertically • FLIP H : Horizontal Flips the video signal horizontally •... -
Page 24: Camera Id
VTC-IRA24F SETUP MENU (OSD) 7.2. CAMERA ID Set the camera ID as numbers, uppercase letters, and related symbols. ←↑↓→ : Up/Down, Left/Right • CLR : clear camera name • POS : for position. • RETURN” : return to the upper menu. -
Page 25: Maintenance
VTC-IRA24F SETUP MENU (OSD) 10. MAINTENANCE Set up functions for WHITE PIXEL MASK and CAMERA RESET. 10.1. W.PIX MASK This function is used to compensate white pixels. When used camera in high-temperature environment, there might be dead pixel on image CCD sensor. With this function ON the dead pixel is to be masked so as to improve the picture quality. -
Page 26: Exit
VTC-IRA24F SETUP MENU (OSD) 11. EXIT Exits SETUP MENU and returns to the normal display. EXIT MODE DESCRIPTION SAVE Saves all the settings before exiting the setup menu. NOT SAVE Exit the setup menu without saving. CANCEL Cancel the exit mode. -
Page 27: Dimensions
VTC-IRA24F Dimensions (unit: inches) 2.80”‘ 2.58” 2.01” 7.09” 2.28” 3.64” 2.01”... -
Page 28: Specifications
VTC-IRA24F Specifications Image Device 1/3” High-Resolution Inter-Line CCD (960H) w/ Effio A Resolution 750 TVL (960H) Effective Pixels 976(H) x 494(V) Minimum illumination 0.003 Lux (0 Lux with LED ON) Infrared LEDs 24 Dynamic IR LEDs IR Distance 65’ (20m) -
Page 29: Spire Series
VTC-IRA24F OTheR PROduCTS FROm VITeK Spire Series 960H Digital Video Recorders VT-SRL Series Spire Series 4, 8, & 16 Channel 960H Digital Video Recorders • Supports High Resolution 960H Cameras • 4, 8 or 16 Video Inputs with 1 HDMI, 1 Spot Monitor Output, and 1 VGA output •... -
Page 30: Warranty
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is non-transferable and extends only to the original buyer or end user customer of a Vitek Authorized Reseller.