Directly Access Through Ie - Vitek Transcendent VTC-TNB8RFA3-2 Manual

8mp ip camera series transcendent series 8 megapixel [4k] ip cameras with matrix ir and gen. iii advanced analytics

Table of Contents

Network Camera User Manual

The system will pop up the above-mentioned textbox to ask you to change the default password.

It is strongly recommended to change the default password for account security. If "Do not

show again" is checked, the textbox will not appear next time.

2.1.2 Directly Access through IE

The default network settings are as shown below:

IP address: 192.168.226.201

Subnet Mask: 255.255.255.0

Gateway: 192.168.226.1

HTTP: 80

Data port: 9008

Use the above default settings when logging into the camera for the first time. Directly connect

the camera to the computer through network cable.

1) Manually set the IP address of the PC and the network segment should be as the same as the

default settings of the IP camera. Open the network and share center. Click "Local Area

Connection" to pop up the following window (actual pop-up may differ depending on your

computer's operating system).

Table of Contents