Table of Contents
Advertisement
Network Camera User Manual
4.2.1 Display Configuration
Go to Image→Display interface as shown below. The image's brightness, contrast, hue and
saturation etc. for common, day and night mode can be set up separately. The image effect can
be quickly seen by switching the configuration file.
Brightness: Set the brightness level of the camera's image.
Contrast: Set the color difference between the brightest and darkest parts.
Hue: Set the total color degree of the image.
Saturation: Set the degree of color purity. The purer the color, the brighter the image is.
Sharpness: Set the resolution level of the image plane and the sharpness level of the image
edge.
Noise Reduction: Decrease the noise and make the image more detailed. Increasing the value
will make the noise reduction effect better but it will reduce the image resolution.
Defog: Activating this function and setting an appropriate value as needed in foggy, dusty,
smoggy or rainy environment to get clearer images.
Lens Distortion Correction: When the image appears distorted to some extent, please enable
this function and adjust the level according to the actual scene to correct the distortion. (Only
some version may support this function. If your camera doesn't support it, please skip this
15
Advertisement
Table of Contents
