Advertisement
Quick Links
• 1/2.9" Sony CMOS
• 2.1 MegaPixel
• Up to 30fps live view @ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-C2NZ39) / 9-22mm
(VTC-C2NZ922) with Auto-Focus Motorized Optical Zoom
• H.264/MJPEG Dual Streaming
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-
Focus-Zoom by tracking motion, then optically zooming in
to that area of the frame
• Onvif Compliance
• Integrated Cooling Fan
• SD memory card slot for Local recording
• Mechanical IR Cut Filter (True Day/Night)
• Motion Activated Pointing Zoom, Defog, BLC/HLC, Motion
Deblur, Pixel Defect Compensation, Mirror, Flip, Pixel
Defect Compensation
• 12VDC/24VAC & PoE (Power over Ethernet) Operation
Specifications & installation procedure subject to
change without notice. Visit www.vitekcctv.com for
the most current information available.
VTC-C2NZ
ENVI 2.1MP Auto-
Focus-Zoom IR Network
Camera
Advertisement
Related Manuals for Vitek VTC-C2NZ
Summary of Contents for Vitek VTC-C2NZ
- Page 1 VTC-C2NZ ENVI 2.1MP Auto- Focus-Zoom IR Network Camera • 1/2.9” Sony CMOS • 2.1 MegaPixel • Up to 30fps live view @ 1920x1080 (1080p) • MegaPixel IR Corrected 3-9mm (VTC-C2NZ39) / 9-22mm (VTC-C2NZ922) with Auto-Focus Motorized Optical Zoom • H.264/MJPEG Dual Streaming •...
-
Page 2: Safety Precaution
NETWORK AF-ZOOM CAMERA Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source. CAUTION: TO REDUCE THE RISK OF ELECTICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. - Page 3 NETWORK AF ZOOM CAMERA Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing in areas where shock or vibration may occur. Pay attention to safety when running the connection cables and make sure that the cables are not subject to heavy loads, kinks, moisture or damage.
-
Page 4: Table Of Contents
NETWORK AF ZOOM CAMERA Contents p.01~02 Safety Precaution p.03 Contents p.04~05 Features p.06 Part Names p.07 Installation Instructions p.08~16 Operating Instructions p.17~18 Specifications p. 19 Warranty... -
Page 5: Features
NETWORK AF ZOOM CAMERA Features Key Features • Full HD, 2Mega Pixel Network Camera, 1920x1080(30p/25p) • ONVIF & PSIA Conformance • True WDR(Wide Dynamic Range) • Improved Noise reduction with the enhanced 3D-NR • VTC-C2ZN/39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom) VTC-C2ZN/922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens (Optical 2.4x Auto focus zoom / Digital 32x zoom) -
Page 6: General Description
NETWORK AF ZOOM CAMERA Features General Description This camera realizes the natural and crisp image as you see the scene in front of you by adopting Auto Focus Full HD(1920x1080p) camera module. • With ICR mechanism, - Enhances its sensitivity about 10x at night time - Can accept infrared light •... -
Page 7: Part Names
NETWORK AF ZOOM CAMERA Part Names Mount Holes Rear Case (Top / Bottom) Front Case Window REAR VIEW IP Reset Button Power Input terminal OSD Control Joy stick Alarm Input / Output terminal SD Memory card Slot Audio Input / Output Jack (3.5mm) RJ-45 Ethernet Port Video Output connector (BNC) CAUTION... -
Page 8: Installation Instructions
NETWORK AF ZOOM CAMERA Installation Instructions Installation Instructions • Make sure the power is removed before installation. • After all connections are properly finished, follow this order for applying power. a) Plug the network cable into the RJ-45 Ethernet Port on the back of the camera. If PoE is the unique power, there will be no need to connect Power terminals. -
Page 9: Operating Instructions
NETWORK AF ZOOM CAMERA Operating Instructions Direct Control menu SPECIAL DEFAULT DESCRIPTION TV SYSTEM Selects HDTV standards for US(60HZ) or EU(50HZ). By this selection, 2nd analog video output switches to NTSC or PAL accordingly. FOCUS ZOOM ZOOM PUSH, AUTO and MANUAL modes are available for MODE PUSH focusing. - Page 10 NETWORK AF ZOOM CAMERA Operating Instructions Day & Night HIGH D<-->N Threshold is a threshold level and Gap to switch from Threshold DAY to NIGHT. Low: The camera enters night mode at a lower light level. High: The camera exits the night mode at a higher light level. AGC amplifies the video gain for brighter video but noise and white pixel will increase.
- Page 11 NETWORK AF ZOOM CAMERA Operating Instructions ON enables to display the Zoom Ratio on the bottom right DISPLAY corner. OZx.x appears during the optical zoom and DZx.x will Zoom Ratio display by multiplying the optical zoom ratio and the actual digital zoom ratio.
- Page 12 NETWORK AF ZOOM CAMERA Operating Instructions Advanced Camera OSD menu Click ‘ADVANCED CAMERA MENU’ bar at CAMERA CONTROL menu to activate the camera OSD menu. Click Up/Down/Left/Right bars to navigate or change the parameters. These options have been pre-configured at the factory for optimal performance. MENU V 3.12 1.
- Page 13 NETWORK AF ZOOM CAMERA Operating Instructions Area to be zoomed in by SMART MOTION ZOOM can be set at MOTION> SMART MOTION ZOOM>ZOOM TARGET. Clicking Up/ Down/ Left/ Right or Enter bar for ZOOM TARGET varies the viewing angle to be zoomed when motion occurs. Set the video left and right and/or up and down by MIRROR/FLIP.
- Page 14 NETWORK AF ZOOM CAMERA Operating Instructions 7. BLC POSITION (default: SET) Improves the visibility of dark objects caused by bright back light. Outside area of BLC window can be over saturated. BLC has a target window for compensation and its size and position can be set by H-POS, V-POS, H-SIZE and V-SIZE 8.
- Page 15 NETWORK AF ZOOM CAMERA Operating Instructions Unlike conventional zoom which can zoom in/out the center area of an image only, the flexible SMART MOTION ZOOM differentiates its usefulness from others. Example, a conventional camera installed in the corner of the ceiling can zoom into the center of the floor in the room and lose the image of a door on the side wall.
- Page 16 NETWORK AF ZOOM CAMERA Operating Instructions Set D-Zoom Pointer POINTING ZOOM H-POINTER V-POINTER RETURN • POINTING ZOOM (OFF) - ON enables to set off-centered location to be the center of zoom • H-POINTER (10) - Sets the horizontal location of area to be zoomed by POINTING ZOOM. •...
-
Page 17: Specifications
NETWORK AF ZOOM CAMERA Specifications ITEM VTC-C2ZN/39 VTC-C2ZN/922 Sensor 1/2.9" Sony® CMOS Resolution 2.1 MegaPixel (1080p / 720p) Video Encoding H.264 / MJPEG Dual Streaming Video Output Ethernet (RJ45) Female & CVBS (BNC) Frame Rate 30fps max More than 50 dB (AGC Off) External IR Input Low active TTL input from External IR illuminator to avoid undesirable ICR switch... - Page 18 NETWORK AF ZOOM CAMERA Speci cations NETWORK SPECIFICATION Memory Card Standard SD - up to 64GB Connectivity Up to 16 simultaneous user connections Audio / Alarm I/O 2-way Audio & Alarm in/out Operating Conditions 14°~122°F (-10°~ +50°C) < 80% RH Input Voltage 12VDC / 24VAC (Dual Voltage) Power Consumption (12VDC)
- Page 19 VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
- Page 20 NETWORK AF ZOOM CAMERA...
- Page 21 NETWORK AF ZOOM CAMERA...
- Page 22 NETWORK AF ZOOM CAMERA...
- Page 23 Class a Digital DeviCe (inDustrial & CommerCial environment) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment.