Table of Contents
Advertisement
Network Camera User Manual
RTSP Port: The default port is 554. Please change it as necessary.
4.6.3 Server Configuration
This function is mainly used for connecting network video management system.
1. Check "Enable".
2. Check the IP address and port of the transfer media server in the CMS. Then enable the
auto report in the CMS when adding a new device. Next, enter the remaining information of
the device in the CMS. After that, the system will automatically allot a device ID. Please
check it in the CMS.
3. Enter the above-mentioned server address, server port and device ID in the corresponding
boxes. Click the "Save" button to save the settings.
4.6.4 DDNS
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config→Network→ DDNS.
3.
Apply for a domain name. Take
www.vitekivpddns.com
for example.
Enter
www.vitekivpddns.com
in the IE address bar to visit its website. Then Click the
"Registration" button.
43
Advertisement
Table of Contents
