Vitek Transcendent VTC-TNB8RFA3-2 Manual page 45

Network Camera User Manual
1. Go to Config→Event→Face Detection as shown below.
2. Enable the face detection function.
Save Source Information: if checked, the whole picture will be saved to the SD card when
detecting a face.
Save Face Information: if checked, the captured face picture will be saved to the SD card when
detecting a face.
Note: To save images to the local PC, please enable the local smart snapshot storage first
(Config→System→Local Config). To save images to the SD card, please install an SD card
first.
3. Set alarm holding time and alarm trigger options. The alarm trigger setup steps are the same
as motion detection setup. Please refer to motion detection chapter for details.
4. Set alarm detection area.
39