Table of Contents
Advertisement
Quick Links
FEATURES:
• 1/3" Progressive Scan CMOS Sensor
• 2.1 MegaPixel With full 1080p/720p HD-SDI (SMPTE292M) / EX-SDI
Output
• Up to 30fps live view@ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZE39) / 9-22mm (VTC-
BHOCRAZE922) Motorized Auto Focus Zoom Lens
• True Day/Night with Dual Filter Switch
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by
tracking motion, then optically zooming into that area of the frame
• Fully programmable advanced WDR
• 40 850nm IR LEDs with up to 150' IR range
• Integrated Cooling Fan
• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Smart
Dynamic IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set,
Mirror, Flip, Lens Refresh, Lens Initialize, Home Position, DSS, LED ON/OFF
control
• 100% Pure Digital Transmission of video data
• Extended Range Beyond 1000' with RG59U 95% Copper Braid Coax
• Heavy Duty IP68 rated water/vandal resistant aluminum construction
• 12VDC / 24VAC Dual Voltage Operation
VTC-BHOCRAZE
2.1MP HD-SDI / EX-SDI
Vandal Resistant AFZ/WDR
IR Bullet Camera
Advertisement
Table of Contents
Related Manuals for Vitek VTC-BHOCRAZE
Summary of Contents for Vitek VTC-BHOCRAZE
- Page 1 VTC-BHOCRAZE 2.1MP HD-SDI / EX-SDI Vandal Resistant AFZ/WDR IR Bullet Camera FEATURES: • 1/3” Progressive Scan CMOS Sensor • 2.1 MegaPixel With full 1080p/720p HD-SDI (SMPTE292M) / EX-SDI Output • Up to 30fps live view@ 1920x1080 (1080p) • MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZE39) / 9-22mm (VTC- BHOCRAZE922) Motorized Auto Focus Zoom Lens •...
-
Page 2: Safety Precaution
Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source.. CAUTION: TO REDUCE THE RISK OF ELECTICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. - Page 3 Safety Precaution NOTICE • The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. • Avoid installing in areas where shock or vibration may occur. • Pay attention to safety when running the connection cables and make sure that the cables are not subject to heavy loads, kinks, moisture or damage.
-
Page 4: Table Of Contents
Contents p. 2~3 Safety Precaution p. 4 Contents p. 5~6 Features p. 6 Package Includes p. 7 Dimensions / Part Names p. 8~10 Installation Instructions p. 11~28 Operating Instructions p. 29 Specifications p. 30 On Cue VT-HDOCE Series p. 31 Limited Product Warranty... -
Page 5: Features
Features Key Features • Full HD, 2.1 Mega Pixel, EX-SDI CAMERA, 1920x1080(30p/25p) • Extended long reach HD Solution • True WDR(Wide Dynamic Range) • Improved Noise reduction with enhanced 3D-NR • VTC-BHOCRAZE39: f=3~9mm, F1.2~F2.1 Day & Night Motorized Auto Focus and Zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom) •... -
Page 6: General Description
Features General Description This camera realizes the natural and crisp image as you see the scene in front of you by adopting Auto Focus Full HD(1920x1080p) camera module. • With ICR mechanism, - Enhances its sensitivity about 10x at night time - Can accept infrared light •... -
Page 7: Part Names
Dimensions (unit : inches) 3.15 3.39 10.11 4.35 Part Names SUNSHIELD BOLT POWER & VIDEO CABLE SUNSHIELD OSD Setup CONTROL COVER DUAL WINDOW EASY BRACKET LOCK/UNLOCK SCREW BRACKET FRONT CASE REAR CASE... -
Page 8: Installation Instructions
Installation Instructions 1. Place the mounting template at the installation position and drill the ceiling or wall if needed. (*The easy bracket can not be installed on the ceiling) 2. Place the easy bracket on pre-drilled position and attach using mounting screws(4x30mm). - Page 9 Installation Instructions Pan & Tilt adjustments • Unlock the screw on the camera bracket through using the torque wrench supplied • Set the camera’s viewing angle then lock the screw on the bracket. 1) Pan limit: Pan is limited to +/- 90°. 2) Tilt limit: Tilt is limited to 0°(2°) min ~ 90°...
- Page 10 Installation Instructions Power Supply Connections Make sure the power is removed before installation. Camera can work with either 24VAC or 12VDC, dual voltage power . Primary and secondary grounds are completely isolated to avoid possible ground-loop problems In case that HD-SDI/EX-SDI Inputs are not supported by your monitor, please use HD-SDI/EX-SDI Converter to connect HD-SDI/EX-SDI cable with Monitor VIDEO (BNC) AC24V/DC12V (Red wire)
-
Page 11: Operating Instructions
Operating Instructions Using OSD controller Setup menu can be accessed and controlled by OSD control joy stick on the side of camera unit. Five commands are available with the joy stick. The design of OSD could be different according to the Model. Video Sub-out Connector Cover Open... - Page 12 Operating Instructions Set the video format according to system, EX-SDI or HD-SDI max 400 ft. via RG59u HD-SDI DVR (HD-SDI) Full-HD Camera max 400 ft.via max 400 ft.via max 400 ft.via RG59u RG59u RG59u HD-SDI HD-SDI HD-SDI DVR (HD-SDI) VT-HD/EXD1 VT-HD/EXD1 Full-HD Camera max 400 ft.via...
- Page 13 Operating Instructions OSD menu Startup Press ‘●’(OSD menu Joy stick key) down for about 2 seconds to access the setup menu mode. Lens Initializing is strongly recommended at the first stage of the setup menu control. ZOOM/FOCUS > LENS INIT > Press the joystick ‘☟’straight down for about 2 seconds.
- Page 14 Operating Instructions EXIT SAVE & EXIT – Exits the menu after saving the parameters. 1. ZOOM/FOCUS ZOOM / FOCUS FOCUS MODE ZOOM PUSH D-ZOOM HOME POSITION LENS REFRESH ☟ LENS INIT. RETURN 1-1. FOCUS MODE (default: ZOOM PUSH) : ZOOM PUSH, AUTO and MANUAL modes are available for focusing. •...
- Page 15 Operating Instructions HOME POSITION O-ZOOM RATIO OZ X2.0 DURATION 5sec RETURN 1-4. LENS REFRESH (default: OFF) : LENS REFRESH can be set to 1~10days and performs a scheduled LENS Initialization automatically. Every initialization occurs when the time reaches the scheduled time after setup or power up. When LENS REFRESH initiates LENS Initialization, a notification LENS INITIALIZING appears on the top left corner on the monitor.
- Page 16 Operating Instructions EXPOSURE MODE AUTO BRIGHTNESS DAY |:::::::|::::::| 10 |::::::|:::::::| 8 BRIGHTNESS NIGHT SENS-UP |:::::::|::::::| 10 MOTION DEBLUR RETURN • AUTO: Optimizes the video level by controlling the iris and the shutter speed automatically. • IRIS Priority: Select to fix IRIS at a certain apperture and the video level is controlled by an automatic shutter control.
- Page 17 Operating Instructions 2-6. MOTION DEBLUR (default: ON) : ON enables MOTION DEBLUR to reduce motion blur in certain indoor environments. Noise or color rolling can increase. 3. SCENE ENHANCE 3-1. NORMAL (default) : Optimized for normal indoor and outdoor in good lighting conditions. 3-2.
- Page 18 Operating Instructions 5. DAY / NIGHT DAY/NIGHT is used to control the setting during day-time and night-time operation. Select the mode according to the lighting conditions and the camera type. SMART (DYNAMIC) IR can be set to reduce the saturation by strong IR illumination at night in any menu.
- Page 19 Operating Instructions • D↔N DELAY (0~60s): Sets the delay time when the camera switches from/to DAY(color) or NIGHT(B/W). 5-3. B/W(NIGHT) : Removes IR cut filter and switches to B/W regardless of light level. 5-4. COLOR(DAY) : DAY/NIGHT is disabled and outputs color video. 5-5.
- Page 20 Operating Instructions 6-1. WHITE BAL (default: ATW) : ATW, ATWext, ONE PUSH and MANUAL are available for the white balance modes. • ATW: White balance is continuously working along with the color temperature changes in the range of 2,000K~8,500K. • ATWext: White balance is continuously working along with the color temperature changes in the range of 1,800K~11,000K.
- Page 21 Operating Instructions 7-2. PRIVACY : 10 Privacy zones which can be enabled individually by ZON DISP are available to mask the video. • ZONE NUM : Set a number to select a privacy zone from 1~10. • ZONE DISP : ON enables to display relevant privacy zone •...
- Page 22 Operating Instructions ※SMART MOTION ZOOM does not work in low light conditions and BW. • STAY ZOOMING : Sets the duration time for zooming by Motion. CAUTION • Set the direction of video by MIRROR/FLIP before setting SMART MOTION ZOOM. Otherwise ZOOM TARGET could be different from your intention. 7-4.
- Page 23 Operating Instructions • ZOOM RATIO : ON enables to display the zoom ratio on the bottom right corner. OZx.x appears during the optical zoom and DZx.x will display by multiplying the optical zoom ratio and the actual digital zoom ratio. •...
- Page 24 Operating Instructions • O-ZOOM RATIO: Set the Optical Zoom Ratio from OX 1.1~OX3.0(OX2.4) • D-ZOOM RATIO: Set the Digital Zoom Ratio from DX 1.1~DX5.0 • STAYING ZOOMING : Sets the duration time for preset zoom area. 8. SYSTEM 8-1. TV SYSTEM (default: US or EU) SYSTEM : Selects HDTV standards for US...
- Page 25 Operating Instructions Detail Function Description ▐ SMART MOTION ZOOM SMART MOTION ZOOM enlarges the area defined by a yellow window to a full size image when motion is detected in the black window. SMART MOTION ZOOM window can be re-sized by adjusting D-ZOOM RATIO and moved by H-POS and V-POS UNLIKE the conventional zoom which can zoom in/out the center area of image only, the flexible zoom location and area, SMART MOTION ZOOM differentiates...
- Page 26 Operating Instructions ▐ POINTING ZOOM This camera has a very useful and powerful feature, POINTING ZOOM, which can zoom in/out any area. POINTING ZOOM is the ability to zoom into an off center location using the PTZ Zoom in/out feature when connected via RS485 Use H-POINTER and V-POINTER to move the Yellow box to set the position of the center of the Zoom.
- Page 27 Operating Instructions * SMART MOTION and POINTING ZOOM VS. Conventional Zoom Smart Motion and Pointing Zoom Conventional Zoom...
- Page 28 Operating Instructions Setting for Zoom Function with PTZ Controller ● Enter the MENU : Press buttons 9+5+PSET (PRESET) ● Set the Preset Zoom : Press buttons 1(or ~4)+PSET (PRESET) ● Move the cursor in the MENU : Moves UP/DOWN/LEFT/RIGHT Joy stick ●...
-
Page 29: Specifications
Detailed Specifications VTC-BHOCRAZE39 VTC-BHOCRAZE922 Sensor 1/3” Progressive Scan CMOS Sensor Resolution 2.1 MegaPixel (1080p / 720p) More than 50 dB (AGC Off) Video Output Selectable: 1x HD-SDI (BNC) / EX-SDI (BNC) IR Illuminators 40 IR LEDs IR Color Temp. 850nm IR Range 150’... - Page 30 COnSIDER THESE OTHER GREAT PRODuCTS FROM VT-HDOCE Series On Cue Series 4, 8, and 16 Channel Real Time 1080p EX-SDI Digital Video Recorders • 4, 8 OR 16 CH EX-SDI / Analog Inputs (hybrid) with Full 1080p Camera Support • Now Supporting Cable distance of up to 1000’ using RG59!* •...
-
Page 31: Limited Product Warranty
(3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. - Page 32 Version 1.0 28492 Constellation Road ValenCia, Ca 91355 June 2015 WWW.ViteKCCtV.CoM...