(3) Set up the device for Direct Printing.
When the connection between the device and printer has been established, the
POWER lamp on the printer flashes twice.
* The power-on sequence may differ depending on the model or brand of the device.
will appear on the LCD display of the device when the printer is correctly
Specify the print settings such as paper type and layout.
You can make settings using the menu on the LCD of your PictBridge compliant
device. Select the size and type of paper that you loaded in the printer.
If your PictBridge compliant device does not have setting menu, change the setting
from the computer. For details, see
Start printing from your PictBridge compliant device.
About PictBridge Print Settings
Settings on a PictBridge Compliant Device
This section describes the print settings on a PictBridge compliant device. When
operating the device, be sure to follow the instructions given in the instruction manual
of your PictBridge compliant device.
In the following description, names of setting items are given according to those
used in Canon-brand PictBridge compliant devices. Setting item names may be
different depending on the brand or model of your device.
Some setting items explained below may not be available on some devices. In this
case, the settings made on the computer using the Canon Setup Utility are applied.
Also, when some items are set to Default on a PictBridge compliant device, the
computer settings for these items are applied. For details, see
on page 30.
Printable Image Data Format
This printer prints images taken with a DCF (Design rule for Camera File system)-
compatible digital camera*.
* Exif2.21 compliant
"Setting on the Computer"
on page 30.
"Setting on the