Canon PIXMA Pro9500 Series Quick Start Manual page 43

If the ALARM lamp on the printer flashes orange four times
Close the Top Cover after ink tank replacement to resume printing.
If printing is in progress and you want to continue printing, press the RESUME/CANCEL
button with the ink tank installed. Then printing can continue under the ink out
condition.
Replace the empty ink tank immediately after the printing. The printer may be damaged if
printing is continued under the ink out condition.
* Printing does not resume if any of the ink tanks are removed. Be sure to press the RESUME/CANCEL button with the
ink tanks installed.
* Continuing to print in the out of ink state will cause the remaining ink level to be displayed incorrectly in the Canon IJ
Printer Utility.
Click Delete Job to cancel the current printing job. Click Stop Job to stop the current
printing job. Click Stop All Jobs to stop all printing jobs. Replace the ink tank with a new
one.
If the ALARM lamp on the printer flashes orange seventeen times
To avoid printing troubles such as the mixing of inks, this printer is designed to stop printing
by flashing the ALARM lamp orange seventeen times when the remaining ink level in an ink
tank goes under the amount of ink required to maintain both printer and print quality.
Stop printing, replace the ink tank, and then print again.
Printing Maintenance
39