The ink absorber is
"Error No.: 1700"
Inner Cover is open
"Error No.: 1851"
Inner Cover is
"Error No.: 1856"
A specified period
of time has elapsed
"Error No.: 2001"
without receiving a
response from the
digital camera or
connected is not
"Error No.: 2500"
An Error Message is Displayed on a PictBridge
The following are the possible errors that may occur when printing directly from a digital still
camera or digital video camcorder*, and the countermeasures to eliminate them.
*Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera or camera.
Camera Error Message
Printer in use
The printer has a built-in ink absorber to hold the ink used during print head
cleaning, for example. This error message indicates that this ink absorber is
Press the RESUME/CANCEL button to clear the error so you can continue
printing. Before the ink absorber becomes completely full, contact the Customer
When you experience this error, you will need to call for servicing to replace the
ink absorber and to check the printer for proper operation.
Close the Inner Cover, then press the RESUME/CANCEL button to resume
Close the Inner Cover, then press the RESUME/CANCEL button.
One page of the print data being sent at the time of the error will be erased, so
print that page again.
A communication time out occurs if an operation that involves
communication takes too long or if it takes too much time to send data. This
may stop printing. Disconnect the camera cable and reconnect it.
If the error is still unresolved, try printing other photographs and see if you can
Check if a device connecting to the Direct Print Port is compatible to the
printer. PictBridge-compatible digital camera or digital video camcorder can
be connected to your printer for Direct Printing.
See "Eleven flashes" in
Images are being printed from
The printer is warming up
No paper in the Auto Sheet
Depending on the model or brand of your PictBridge compliant
device, you may have to select a print mode before connecting the
You may also have to turn on the device or select Play mode
manually after connecting the device to the printer.
Perform necessary operations according to the instruction manual
supplied with your device.
"Handling Error Messages"
Wait until printing ends.
Wait until warm-up ends. When it is ready, the printer starts
Load the paper in the Auto Sheet Feeder, and select Continue
in the display on your camera.
* To resume printing, you can press the RESUME/CANCEL
button on the printer instead of selecting Continue.
on page 76.