(5) When the confirmation message is displayed, click OK.
Print Head Deep Cleaning starts when the POWER lamp starts blinking blue.
Print the nozzle check pattern to check the Print Head condition.
"Printing the Nozzle Check Pattern"
If a particular color is not printed properly, replace the ink tank of that color. See
"Replacing an Ink Tank"
Ensure that the printer is on.
Do not perform any other operation until the Print Head Deep
Cleaning finishes. This takes about 180 seconds.
on page 34.
If the print head nozzles are still not clean, turn off the printer. Be sure
to perform another Print Head Deep Cleaning 24 hours after turning off
If this does not solve the problem, the Print Head may be worn out.
Contact the Customer Care Center.
(3) Select the ink group to clean.
Clicking Initial Check Items
displays the items to be checked
(4) Click Execute.
on page 47.