Connecting To The Power Box - Canon CXDI-60G Service Manual

7.1.2 Connecting to the Power Box

(1) Removing the cover
1) Remove the 5 screws from the back of the power box and the 2 screws on each side at the
bottom of the power box to remove the top cover.
Different types of screw are used for backside and lateral side. Make sure to use the proper type
of screw respectively on installation.
2) Before connecting the X-ray I/F cable and remote cable, remove the LAN cable connector
guard to avoid injury.
2. Installation
LAN cable connector guard
13
Also remove screws on
the far side