Canon CXDI-60G Service Manual page 59

(5) Set Up Startup Menu
1) Purposes
1-1) Register the CXDI software to the "Startup Group".
The CXDI software is started automatically when the CXDI system is turned on.
1-2) Change the window view size
Hide the other application screen view except the CXDI software.
1-3) Delete the CXDI software from the "Startup Group".
The CXDX software is not started when the CXDI system is turned on.
2) Notes
2-1) The CXDI software is not registered in the "Startup Group" at the factory setting.
Therefore register the CXDI software to the "Startup Group" after the system
installation.
2-2) The window view size of the program registered in "Startup Group" has one own size
with the each short-cut icon. Be sure to set the window view size of CXDI software at
the same time with the register to the "Startup Group".
3) Register the CXDI software to the "Startup Group" procedure.
3-1) Connect keyboard and mouse to the control computer.
3-2) Turn the all CXDI system power on after the all installation finished. And after that
Windows XP starts.
3-3) Open the "Taskbar and Start Menu" from the Start Menu.
Start⇒Settings⇒Taskbar and Start Menu
3-4) "Taskbar and Start Menu Properties" appears. Click "Start Menu" tab, and then click
Taskbar and Start Menu Properties⇒Start Menu⇒Classic Start⇒Menu Customize
3-5) Click Add, and Create Shortcut appears. Click Browse.
3-6) Browse appears. Find a file named "ccrstart.bat" in drive [D:\ccr] and click OK.
3-7) D:\ccr\ccrstart.bat appears in the Command line. Click Next.
3-8) Select Program Folder appears. Select Startup folder and click [Next].
3-9) Select a name for the shortcut appears. Type ccrstart.bat. Click [Finish].
3-10) Close the Taskbar [Start], and login again to Windows XP.
Start⇒Shut Down⇒Log off cxdi.
3-11) After login the computer, make sure that the CXDI software starts up.
2. Installation
43