4 Grid Lock Assembly
4.1 Grid lock assembly procedure
1) Fit the anchoring hook (2) into the hook slide plate (3), insert the lock spring (4) into
the indentation of the anchoring hook (2), and secure the hook to the grid frame (1)
using the two screws (XA1-1260-406).
* Ensure that the anchoring hook (2) is not installed the wrong way round.
* The anchoring hook (2) must move smoothly after the hook slide plate (3) is
secured.
* Be careful when tightening up the two screws so as to avoid damaging their
heads.
(4)
4. Repair Guide
(3)
Protuberance on anchoring
18
(2)
(1)
hook