Canon CXDI-60G Service Manual page 73

Parameter List (Separate Document 2)
DICOM printer
In the CXDI, DICOM printers are administered separately according to printer product.
The parameter settings for DICOM printer used in CXDI are described below.
Parameter
-C copies
This parameter uses a
number to designate the
number of copies.(1/2/...)
-y priority
Priority in the DICOM
printer
(HIGH/MED/LOW)
-D destination
Film destination
(MAGAZINE/PROCESS
OR/BIN_i)
-F film type
Film media type ("BLUE
FILM" / "CLEAR FILM"
/ "PAPER")
2. Installation
Meaning
* This parameter is used in the
DICOM Basic Film Session
(2000, 0010).
* When the number of copies
is designated, film sheets are
printed in the quantity
specified in a single printing
operation.
* This parameter is necessary
when printing multiple
sheets for a single data
transfer operation.
* This parameter is used in the
DICOM Basic Film Session
(2000, 0020).
* This parameter determines
where this transfer image is
inserted into the queue in the
DICOM printer. At HIGH,
the image is printed first
among the queued images.
* This parameter is used in the
DICOM Basic Film Session
(2000, 0040).
* Film is sent to the output
device designated by
RECEIVE MAGAZINE or
the automatic developer.
* This parameter is used in the
DICOM Basic Film Session
(2000, 0030).
* Film is printed as the
designated film type.
57
Description
* This parameter is set according to the
user's requirement.
* In the DICOM library TYPE3, the value
is transferred together with the Tag.
However, if the value is unknown, the
value is either is transferred as a
character string with length 0, or the
element itself is not transferred.
The printer default values are used if
this parameter is not entered.
* This parameter is set according to the
user's requirement.
* In the DICOM library TYPE3, the value
is transferred together with the Tag.
However, if the value is unknown, the
value is either transferred as a character
string with length 0, or the element itself
is not transferred.
The printer default values are used if
this parameter is not entered.
* Note this parameter does not determine
where this transfer image is inserted into
the CXDI queue.
The printer default values are used if
this parameter is not entered.
* The film is usually discharged to the
default output device.
The printer default values are used if
this parameter is not entered.
* Although many types of films cannot be
detected, the film type can be selected in
the KELP2180.
* In this parameter, be sure to put
quotation marks (" ") around 0x20 since
it comes between BLUE and FILM.