4. Repair Guide
4)
While pressing the protuberance on the lock base (6) against the indentation in the
slide switch (5), and fasten them together securely using the screw (XA4-1200-609).
Now tighten up the screw (XA4-1200-609) which was temporarily secured in step 3).
* Bear in mind that using excessive torque for tightening the screws will damage
the slide switch (6).
* Be careful when tightening up the two screws so as to avoid damaging their
heads.
* Reference value for the tightening torque: 1kgf·cm (9.8N·cm)
(5)
(6)
Press the protuberance
against this part.
Fasten together securely
using the screw
20