Canon CXDI-60G Service Manual page 103

3-4) Changing the items below contained in the file allows you to change the settings for
the counter in the user screen.
ExpResult.ini file
[SystemCounter]
TotalStudy=
UsrStudyCounter=
UsrExposure
Counter=
[LastCounterReset]
StudyCounter=
ExpCounter=
[COUNTER 0]
TotalCount=
[COUNTER1]
TotalCount=
[COUNTER2]
TotalCount=
[COUNTER3]
TotalCount=
3-5) After overwriting the values, overwrite the file "ExpResult.ini" and save.
3-6) Close all windows that are open on the Desktop, and then start up the CXDI software.
3-7) Open the "System Information" screen, and check that the changed items have been
set correctly. [Fig 2]
"TOTAL IMAGES" indicates the total number of images obtained with all imaging
units automatically.
2. Installation
Screen Display
TOTAL STUDIES
STUDY COUNTER
IMAGE COUNTER
Year, month, day, hour, minute
Year, month, day, hour, minute
Total number of images obtained
with imaging unit 1.
Total number of images obtained
with imaging unit 2.
Total number of images obtained
with imaging unit 3.
Total number of images obtained
with imaging unit 4.
[Fig 2]
87
Note
Can be overwritten at the
user screen
Can be overwritten at the
user screen