Table of Contents
Advertisement
6.
RS232 Interface
6.1
Guide
Users can use computer via RS232 interface to remote control for the tester. This interface
applies binary code transmission mode, its command format is the same as RS485 interface.
The detail command description, please see section 5.6 Command Description.
6.2
Interface Specification
It's a standard RS232 interface, the setting value as the following:
BAUD RATE : 4800/9600/19200
PARITY
: NONE
FLOW CTRL. : NONE
6.3
RS-232 Single Unit Connection for Parameter
Setting
1. Press
under "STANDBY" screen, by using
MENU
"OPTION". Next to press
press
to enter RS485 setting screen.
SELECT
2. Use
to move the highlight, and
NEXT
3. Setting item descriptions for single unit connecting:
a. INTERFACE: Select RS485 interface
b. UNIT TYPE: Select device type as SLAVE.
c. BAUD RATE: Select transmission as 4800, 9600 or 19200 baud rate.
d. UNIT ADDRESS: Set as 1.
6.4
Connector
RS232 connecter of the instrument is a 9-pin D-Sub connector.
5
4
9
to move the highlight to "REMOTE INTERFACE" then
SELECT
3
2
1
8
7
6
,
to move the highlight to
F1
F2
,
to change the settings.
UP
DOWN
RS232 Interface
6-1
Hide quick links:
Advertisement
Table of Contents
