2.
Operation and Setting
2.1
Front Panel
The front panel is divided into several function areas. This section explains each control and
the information displays on LCD.
Button Area
Stop Button
Display Area
Power Switch Status Line
Start Button
Calibration Switch
2.1.1 Display Area
Function Key Display Area: Different function text appears in different menu. The
mapping function keys (F1-F4) are located at right. The function key is invalid if the text
is blank.
Status Line: This line shows the setting mode, value range, and test results.
RMT : When the text is highlighted, it means the system is under on-line status.
LOCK: When the text is highlighted, it means the system is under protection via
parameter.
OFST: When the text is highlighted, it means the leakage current has been offset by the
system.
Function Key Display Area Function Keys
Pass Indicator Test Status Indicator Common Test Terminal
Fail Indicator
Operation and Setting
Button Area
High Voltage Output Terminal
Terminal Area
2-1