1.
(0 STEPS)
2. (0 STEPS)
3. (0 STEPS)
4. (0 STEPS)
5. (0 STEPS)
SEL. MEMORY
(4) At this time use Function Key [F1] and [F2] to move the highlight to the memory for
processing, then press Function Key [F3] will prompt a confirmation window. Press
Function Key [ENTER] to confirm and Function Key [UP] or [DOWN] to select stored
character of file name. Press [NEXT.C] to select next character and [ENTER] to
confirm the file name, the maximum file name is 10 characters.
1.
(2 STEPS)HIPOT
2. (0 STEPS)
3. (0 STEPS)
4. (0 STEPS)
5. (0 STEPS)
SEL. MEMORY
(5) When executing [RECALL] or [DELETE] function, use Function Key [F1] and [F2] to
move the highlight to the memory for processing, then press Function Key [F3] will
prompt a confirmation window. Press Function Key [YES] to confirm or Function Key
[NO] to cancel, then can recall or delete the memory set. Each memory contains
test parameters, preset parameters and number of test steps.
1.
(2 STEPS)HIPOT
2. (0 STEPS)
3. (0 STEPS)
4. (0 STEPS)
5. (0 STEPS)
SEL. MEMORY
2.3.2 System Setup
How to enter the SYSTEM SETUP menu
■
(1) In [Standby Menu], press the Function Key [MENU] and by using Function Key [F1],
[F2] to move the highlight to "SYSTEM" and then press Function Key [F3] to enter
into the parameter setting menu as below:
RMT
LOCK OFST ERR
RMT
LOCK OFST ERR
RMT
LOCK OFST ERR
Operation and Setting
LAST
DOWN
SELECT
RETURN
UP
DOWN
ENTER
CANCEL
LAST
DOWN
SELECT
RETURN
2-7