Using Simple Mode - Canon MultiPASS MP360 Software Manual

Using Simple Mode

The Simple Mode dialog box is much simpler than the Advanced Mode dialog box.
The only settings you have to adjust are where the document is placed and what type of document
it is. You can select [Platen Glass] only in [Select source].
1
Place the document face-down on the platen glass.
2
In [Type of original], select the document type.
[Photo]
[Magazine]
[Newspaper] To scan text and line drawings (black and white, 300dpi)
[Document] To scan color image or text in monochrome. Especially appropriate, for
If you select [Photo], [Magazine] or [Document], there will be automatic color correction. (To turn off
automatic color correction, in Advanced Mode, on the [Settings] tab, click [Preferences]. On the
[Settings 1] tab, clear [Always perform the auto tone].)
3
To see a preview image (provisional scan), click [Preview].
A preview of the document will be scanned and appear at the left of the dialog box.
4
Click [Scan].
Scanning of the document will begin.
[ScanGear MP] (Simple Mode) dialog box
To scan color photos (color, 300dpi)
To scan color magazines (color,150dpi, with the Descreen function)
scanning high-resolution monochrome image (grayscale, 300dpi)
88