Controlling Operating Noise (Quiet Mode) - Canon MultiPASS MP360 Software Manual

Controlling operating noise (Quiet Mode)

This function can only be used when the [Printer Properties] or [Printing Preferences] dialog box
is opened from the printer icon.
IMPORTANT IMPORTANT IMPORTANT
• Windows 2000/XP: Administrator privileges are required.
• When Quiet mode is active, the operating noise of the machine is reduced and printing speed will be
slower than normal.
1
On the Windows taskbar, click [Start], point to [Settings], then click [Printers]. In the
[Printers] window, right-click the printer icon for the machine, then click [Properties]
(Windows 2000: [Printing Preferences]). (Windows XP: Click [Start], then click
[Printers and Faxes]. In the [Printers and Faxes] window, right-click the printer icon,
then click [Printing Preferences].)
2
On the [Maintenance] tab, click [Quiet Mode].
3
Adjust the following settings.
[Do not use quiet mode]
Select if you do not wish to use quiet mode.
The machine is normally set on this setting.
[Always use quiet mode]
Select if you wish to set the machine on quiet mode.
The machine will continue to use quiet mode regardless of the time.
[Use quiet mode within specified time]
Select if you wish to automatically use quiet mode within certain times.
Select and you will be able to enter times in [Start time] and [End time] using the 24-hour
clock.
For example, you can set up the machine on quiet mode at night-time.
4
When you have adjusted your settings, check that the machine is turned on, then click
[Send].
When asked to confirm, click [OK]. The settings will be registered in the machine.
NOTE
To revert to the default setting in this dialog box, click [Defaults], then [Send]. When a message asking you
to confirm appears, click [OK].
"Changing print settings (Opening the settings dialog box)"
59