Using Advanced Mode - Canon MultiPASS MP360 Software Manual

Using Advanced Mode

In Advanced Mode, you can adjust settings such as brightness and contrast to the preview.
1
Place the document face-down on the platen glass.
2
Select settings for [Color Mode], [Output Resolution] and [Paper Size].
"Advanced Mode - [Main] tab settings"
3
Click [Preview].
NOTE
Selecting the range in the preview area and clicking [Zoom] reloads the selected image to enlarge it.
When enlarged image is displayed, the [Zoom] button changes to the [Undo] button. Clicking [Undo]
displays the image in normal size.
4
If you want to scan only part of the document, specify the parameters.
"Advanced Mode - Specifying the parameters of a scan"
5
If you want to print the document at a reduced or enlarged size, specify the [Print Size].
"Advanced Mode - [Main] tab settings"
6
If necessary, rotate or flip the image, or apply settings such as [Descreen] and [Unsharp
Mask].
"Advanced Mode Toolbar"
"Advanced Mode - [Settings] tab settings"
7
If necessary, in the [Color] tab, adjust the brightness and contrast.
"Advanced Mode - [Color] tab settings"
8
Click [Scan].
[ScanGear MP] (Advanced Mode) dialog box
89