Canon MultiPASS MP360 Software Manual page 30

Canon multipass mp360: software guide
Hide thumbs Also See for MultiPASS MP360:
Table of Contents

Advertisement

[Fit-to-Page Printing]
If the page size and printer paper size are different, this setting will automatically print
your document to fit the printer paper size.
(Fit-to-page printing)"
[Scaled Printing]
For printing the document at an enlarged or reduced size.
[Page Layout Printing]
For printing multiple pages on a single sheet of paper (such as when you want to print a
draft document with two pages on one sheet).
(Page layout printing)"
[Poster Printing]
For printing at poster size divided across several sheets of paper. The sheets of paper are
assembled after printing to form a poster.
[Booklet Printing]
The document is printed on both sides with two pages each on both the front and reverse
side of the paper, and is folded down the middle to create a booklet.
and binding a document into a booklet (Booklet printing)"
[Scaling]
If you select [Scaled Printing], either select or enter a percentage.
[Borderless Printing]
Select to make your data larger than the paper size and print over the entire surface of the paper
without any white borders.
If you select borderless printing, you cannot select the [Printer Paper Size], [Printing Type], or
[Duplex Printing] setting on the [Page Setup] tab, or settings on the [Stamp/Background] tab.
"Borderless printing"
[Amount of Extension]
When you select [Borderless Printing], the sections that extend beyond the paper are not printed
because the image is enlarged to a size larger than the paper size. Use the slider to adjust how much
the image extends beyond the paper.
[Duplex Printing]
Select to print on both sides of a sheet of plain paper.
[Staple Side]
If the long side of the paper is to be stapled, select [Long-side stapling]. If the short side is to be
stapled, select [Short-side stapling].
[Copies]
Either select or enter the number of copies you want to print.
[Reverse Order]
Select to print a multiple-page document from the last page. The pages of the document are stacked
in the correct order.
[Collate]
When printing multiple copies of a multiple-page document, select to print all pages of one
document before the next copy is printed. If not selected, each page is printed for the specified
number of copies before the next page is printed.
"Enlarging/reducing to fit the paper size
"Scaled printing"
"Printing multiple pages on one sheet
"Poster printing"
"Duplex printing"
"Duplex printing
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipass mp390Multipass mp370

Table of Contents