Canon MultiPASS MP360 Software Manual page 97

[Reduce Dust and Scratches]
Scanned photos may contain white dots caused by dust and scratches. This setting reduces the dust
and scratches on photos. Select from [Soft], [Normal] and [Hard]. [None] is selected by default.
[None]
For no reduction of dust and scratches.
[Soft]
For reducing small dust and scratch marks. With this setting, large dust or scratch marks
may remain.
[Normal]
Normally this setting is recommended.
[Hard]
For reducing large dust and scratch marks but evidence of the reduction process may
remain and may also remove delicate parts of the image.
IMPORTANT IMPORTANT IMPORTANT
• For scanning printed materials, the [None] setting is recommended.
• If [Output Resolution] is set to [600] dpi or less and [Descreen] is selected, you cannot select [Reduce
Dust and Scratches]. (If you set [Output Resolution] to [601] dpi or more, the [Descreen] setting will
be automatically disabled and you can then set [Reduce Dust and Scratches].
• This setting may not be effective for some types of photos.
[Color Settings]
Click one of the following. The default setting is [Recommended].
[Recommended]
Vividly reproduces the tone of a document on the screen. It is recommended that you
normally select this setting.
[Canon ColorGear Color matching]
Select to automatically match the scanner, monitor and color printer colors, thus reducing
time and trouble to manually match the monitor and printer colors.
This setting is available when [Color] is selected in [Color Mode]. If color matching is
selected, the settings on the [Color] tab will not be available (the [Color] tab will
disappear).
[Calibration]
Calibrate the scanner if the colors in the preview image vary from those in the original document.
Clicking the [Calibration] button starts the calibration process, which adjusts the scanned image to
the proper coloration.
IMPORTANT IMPORTANT IMPORTANT
Do not open the document cover while the scanner is calibrating.
[Preferences]
Click to display the [Preferences] dialog box. You can adjust settings for scanning and previewing.
"Advanced Mode - [Settings 1] tab settings in the [Preferences] dialog box"
"Advanced Mode - [Settings 2] tab settings in the [Preferences] dialog box"
95