Mp Toolbox Settings; Scanner Settings - Canon MultiPASS MP360 Software Manual

MP Toolbox settings

You can adjust the following settings when scanning with the MP Toolbox.

Scanner settings

[Select source]
Displays where the document is placed. You can select [Platen Glass] only.
[Scan mode]
Select the scan mode. The scan modes you can select differ depending on the MP Toolbox button
you click.
[Black and White]
Scans a document as a black and white image.
[Black and White (OCR)] ([OCR] button only)
Scans a document as a black and white image. Select this mode to scan texts crisply,
particularly to process it with OCR software. The document is scanned in grayscale and
then converted to black and white, therefore takes longer than the [Black and White]
setting.
[Grayscale]
Scans a document as a grayscale image (similar to a monochrome picture).
[Color (Magazine)]
Scans a document as a color image with the Descreen function set to On. The Descreen
function is designed to reduce as much as possible the distorted pattern (moire) which
occasionally occurs when scanning printed materials. The scanning of a document will
take longer if you use this function.
Example: [Scan] dialog box
74