Advanced Mode - [Main] Tab Settings - Canon MultiPASS MP360 Software Manual

Canon multipass mp360: software guide
Hide thumbs Also See for MultiPASS MP360:
Table of Contents

Advertisement

Advanced Mode - [Main] tab settings

You can adjust the following settings in the [Main] tab.
[Select source]
Displays where the document is placed. You can select [Platen Glass] only.
[Color Mode]
Select the type of document and the way in which it will be scanned.
[Black and White]
Select this mode when outputting photos and other documents to monochrome printer. The
image is displayed in black and white. The contrast in the image is divided at certain levels
(threshold values) into black and white and is displayed in two colors. Threshold can be
set on the [Halftone] tab.
[Grayscale]
Select this mode to scan black and white photos or monochrome images. The image is
expressed in a 0-256 scale of black and white.
[Color]
Select this mode to scan color documents. The image is expressed in 256 levels (8 bit) of
R(ed), G(reen) and B(lue).
[Text Enhanced]
Select this mode to scan texts crisply, particularly to process it with OCR software. The
image is displayed in black and white. The document is scanned in grayscale and then
converted to black and white, therefore takes longer than the [Black and White] setting.
[Output Resolution]
Select the resolution for the scan.
[ScanGear MP] (Advanced Mode) dialog box
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipass mp390Multipass mp370

Table of Contents