[Multi-Crop] In Scangear Mp (Advanced Mode) - Canon MultiPASS MP360 Software Manual

7
Click [Next].
Scanning of the multiple documents will begin.
If you selected [PDF] in [Save as type] in the MP Toolbox settings
As each document is scanned, the following dialog box will appear.
As you continue to scan, position the next document and click [Next]. Once scanning is
completed, click [Finish].
IMPORTANT IMPORTANT IMPORTANT
The above dialog box is not displayed if you have selected [Automatically quit ScanGear MP after
scanning] on the [Settings 1] tab, in [Preferences] in Advanced Mode on the [Settings] tab.

[Multi-Crop] in ScanGear MP (Advanced Mode)

To specify detailed settings for scanning two or more small documents (photographs etc.), use the
[Multi-Crop] in ScanGear MP (Advanced Mode).
Unlike the [Multi-Scan] in ScanGear (Simple Mode), you can set the scanning area etc.
1
Place the document face-down on the platen glass.
For placement of the documents
2
Do one of the following.
Use a button in the MP Toolbox
Click a button in the MP Toolbox, select [Use the scanner driver to make advanced
settings], adjust other settings, then click [Start].
Scan from an application
Windows XP: If the system is set up for the WIA driver, switch to ScanGear MP (
"Scanning an image from an application"
document in the application (e.g. [Import], [Acquire image]. See your application
documentation).
The ScanGear MP dialog box will open.
3
If the [Advanced Mode >>] is displayed, click [Advanced Mode >>].
"Switching between Simple Mode and Advanced Mode"
4
Click [Preview].
The document will be provisionally scanned as a preview.
5
If necessary, change the settings such as [Color Mode] or [Output Resolution].
"Advanced Mode - [Main] tab settings"
6
In [Multi-Crop], click [Apply].
Each of the preview documents is surrounded by dotted lines. Each of the documents is separated by its
frame of dotted lines and is scanned as a separate document.
To delete all the dotted lines, click [Reset].
7
If you wish to adjust the frame of dotted lines drag the dotted lines.
If you wish to delete the frame, right-click the frame and then click [Delete].
"Scanning two or more small documents at one time"
) and select the command for scanning a
85