To Scan With The Settings In The Saved Color Adjustment File; To Revise The Color Adjustment Settings Currently On Display Or To Return To Default Settings; To Revise All Color Adjustment Settings Or To Return To Default Settings; Advanced Mode - [Color] Tab - Brightness And Contrast - Canon MultiPASS MP360 Software Manual

To scan with the settings in the saved color adjustment file

Click (Load button).
The image will be scanned with the saved settings. The file suffix will be (.adc) for color and (.adg) for
grayscale.
To revise the color adjustment settings currently on display or to return to
default settings
Click [Reset].

To revise all color adjustment settings or to return to default settings

Click [Reset All].
[Master], [Red], [Green], [Blue] and all settings for contrast/brightness, gamma, histogram and tone
curve will be suspended and will return to default settings. Images which have undergone automatic
color correction will also return to their defaults.

Advanced Mode - [Color] tab - Brightness and contrast

If the original image is too dark or too bright, or if the image quality is flat due to lack of contrast,
you can adjust the levels of brightness and contrast.
The brightness and contrast are active if [Color] or [Grayscale] is selected in [Color Mode] on the
[Main] tab.
In ScanGear MP Advanced Mode, follow the steps below.
1
Click [Reset] in [Auto tone].
2
On the [Color] tab, click
3
For a color image, in [Channel], select a color to adjust either [Red], [Green], or [Blue],
or select [Master] to adjust the three colors together.
(Brightness/Contrast).
100