Advanced Mode - [Settings 1] Tab Settings In The [Preferences] Dialog Box - Canon MultiPASS MP360 Software Manual

Advanced Mode - [Settings 1] tab settings in the [Preferences]
dialog box
To open the [Preferences] dialog box in Advanced Mode on the [Settings] tab, click [Preferences].
You can adjust the following settings on the [Settings 1] tab.
[When application hides driver user interface]
Color mode cannot be changed in applications such as OCR software which will not display the
ScanGear MP dialog box (UI off mode), and consequently the document will be scanned with the
settings in the application. To override the application settings and scan in a specific color mode,
configure the settings here. Neither of these settings is selected by default.
[Color (documents)]
You cannot select this setting.
[Text Enhanced]
The document is scanned in [Text Enhanced] mode when the [Black and White] setting is
configured in the application.
IMPORTANT IMPORTANT IMPORTANT
These settings will be invalid in UI mode (the mode in which the ScanGear MP dialog box is
displayed).
[Preview at opening of ScanGear MP]
Select the preview operation when you open ScanGear MP. [Display saved preview image] is
selected by default.
[Automatically execute preview]
The preview scan will start automatically when you open ScanGear MP.
[Display saved preview image]
Displays the image last previewed.
96