Canon MultiPASS MP360 Software Manual page 82

When ScanGear MP is displayed
Adjust your settings, then click [Scan].
For settings
As each document is scanned, the following dialog box will appear.
7
As you continue to scan, position the next document and click [Next]. Once scanning is
completed, click [Finish].
IMPORTANT
The above dialog box is not displayed if you have set ScanGear MP to open, and selected
[Automatically quit ScanGear MP after scanning] on the [Settings 1] tab in [Preferences] in
Advanced Mode on the [Settings] tab.
Even if you have selected [Color (Multi-Scan)] in [Scan mode], if you have selected [Create
multiple PDF], one PDF will be created from several documents placed on the platen glass. If you
continue to scan multiple documents, they will also be created into one PDF.
NOTE
• For text documents or black-and-white documents, it is recommended you select either [Black and White]
or [Grayscale] in [Scan mode].
• If making a multiple PDF with color documents ([Image quality] set to [300 dpi]), it is recommended that
the PDF have fewer than 20 pages.
"Setting preferences and scanning with ScanGear MP"
[ScanGear MP] dialog box
80