Characters And Symbols For Fax Numbers - Canon MultiPASS MP360 Software Manual

3
Enter the [Name] and [Fax] of the recipient, then click [Add to Recipient List].
NOTE
• You can only enter one recipient.
• You can use 0 through 9, dash (–), and parenthesis ( ) etc. in fax numbers.
for fax numbers"
• You can also specify a recipient from the Address Book.
Book"
• If you register a recipient in the Address Book, you can use the information the next time you send a
fax to the same recipient.
4
Click [Send Now].

Characters and symbols for fax numbers

You can use the following characters and symbols in the faxes you send from your computer or for
a recipient you register in the Address Book.
Character/symbol
0-9 * #
, p
P
T
.
R
+ - (), space
"Adding a recipient to the Address Book"
Explanation
For use in telephone and fax numbers.
To place a pause between numbers.
To place a pause at the end of an array of numbers.
Numbers after the T will be sent as a tone signal.
DT detection function (Europe).
PSTN/PBX switchover function (Europe).
To make the number easier to read. You cannot insert a space at the front of
a number.
[Send Fax] dialog box
"Selecting a recipient from the Address
"Characters and symbols
110