Creating And Maintaining User Profiles - HP Digital Sender 8100C Administrator's Manual

Creating and maintaining user profiles

This section contains information about user profiles that pertains to
the administrator. See the user guide for details on other uses.
The administrator determines who can create and modify user
profiles in these ways:
To create a user profile
1
2
3
Note You may want to use a naming convention for all user names, such as
last name_first name or first name_last name.
4
5
6
All manuals and user guides at all-guides.com
If Allow user self-registration in the General configuration menu
is on, users can create and modify their own profile. The
administrator can see and modify any user profile, including user
passwords.
If Allow user self-registration in the General configuration menu
is off, only the administrator can create and modify user profiles,
including user passwords.
The administrator can also enable or disable guest usage of the
digital sender (General configuration menu). If disabled, anyone
wishing to use the digital sender would be required to have a user
profile.
At the control panel, press
(F1).
If an administrator password is required, the HP Digital Sender
8100C Administrator's Password dialog box appears. Type the
password and press
Type a name in the Users field and press
Type the user's e-mail address, password, and password
confirmation, pressing
Press O (F2) and select
PTIONS
option in the user profile.
Press O (F1). The user profile can now be used to send e-mail,
K
send faxes, and print.
Creating and maintaining user profiles
S (A +F4). Then press
ETUP LT
O (F1).
K
E after each field.
NTER
Y (F1) or
ES
U
SERS
A (F1).
DD
N (F4) for each
O
41