HP Digital Sender 8100C Administrator's Manual page 59

58
Control panel messages (continued)
Message
Invalid credentials. Check
account name and
password.
Invalid password. Press any
key to retry.
JetDirect not responding.
Please check the card or the
firmware version.
The LDAP configuration is
inconsistent. Please check.
LDAP protocol error.
All manuals and user guides at all-guides.com
Description
The account name and
password that have been
configured for authenticating
LDAP searches are invalid.
The digital sender did not
recognize the password you
entered.
The firmware version of the
HP JetDirect print server
(interface card) installed in
the digital sender is not
compatible with the product.
There is a problem with the
LDAP configuration.
The LDAP search could not
complete because of a
problem with a network
connection or LDAP server.
Actions
Use the E-mail configuration menu at the
control panel to change the account name
and password.
Press any key and then retype the
password. The password is case-
sensitive, so make sure you type the right
combination of uppercase and lowercase
letters.
If the problem persists see
administrator password" on page
Contact HP customer support.
Using the E-mail configuration menu, make
sure that you have correctly configured
the LDAP server.
Try reentering the information in the E-mail
configuration menu.
Turn the digital sender off and then back
on.
If the problem persists, contact
HP customer support.
Turn the digital sender off and then back
on.
Check that the other functions of the
digital sender are working.
Make sure the LDAP server is functioning
properly.
If the problem persists, contact
HP customer support.
"Erasing
30.