Restoring The Digital Sender - HP Digital Sender 8100C Administrator's Manual

50
Note
Note
Backup and Restore codes
Source
/dir
/d
/p
/l
/tr
/f
All manuals and user guides at all-guides.com

Restoring the digital sender

Use this procedure:
After initializing the address books
After performing a Restore to factory defaults
When instructed to do so by HP Customer Support
This procedure will erase any changes made to the address books and
configurations since a backup image was created.
To restore the digital sender
1 Make sure the computer you are using has the Backup and
Restore utilities installed.
2 At a command line, run Restore using the following syntax:
restore.exe/f: Restore File /d: Digital Sender
/p: Administrator Password /l/tr
Example: restore.exe /f:c:\data\data.tgz /d:xxx.xxx.xxx.xxx /
p:password /l /tr
Description
Directory must be in a volume supporting long file names.
Digital sender network name or IP address.
Digital sender administrator password.
Log results in log file (backup.log or restore.log).
Log low level activity in trace file (backup.trc or restore.trc).
Restore file, generated by previous backup.