HP Digital Sender 8100C Administrator's Manual page 62

Internal error message descriptions and actions
Code Description
NOTE
Every internal error message has a code associated with it. Use the code to locate the
description and action.
5, xxxxx Internal software or hardware
problem.
7, xxxxx Internal failure.
10,0 Failure initializing address books.
All manuals and user guides at all-guides.com
Actions
Troubleshooting the digital sender
Turn the digital sender off and then back on.
Verify control panel access hatch is snapped into
place.
Verify all cables are seated securely.
If the problem persists, note the code and contact
HP customer support.
Turn the digital sender off and then back on.
Reconfigure all network parameters.
If the problem persists, note the code and contact
HP customer support.
Turn the digital sender off and then back on.
Check the address book database (see
the address book database" on page
Clear the address book.
Reset the digital sender to factory defaults (see
"Resetting to factory defaults" on page
NOTE: This also erases the administrator password,
all TCP/IP configuration, and all public and personal
address books.
If the problem persists, note the code and contact
HP customer support.
61
"Checking
38).
37).