HP Digital Sender 8100C Administrator's Manual page 20

All manuals and user guides at all-guides.com
To configure parameters
1 If you have not already done so, turn the digital sender on.
2 Press S (A
ETUP LT
menu.
3 Press S
ETTINGS
General configuration menu from the list which appears. Press
O (F1).
K
4 In the configuration menu, use the arrow keys to scroll to a
parameter you want to modify and then press
5 Configure the parameters by selecting a value from a list using
the arrow keys or by typing in a value.
6 When finished, press
the menu.
7 When finished with the General configuration menu, press
(F1).
8 Repeat steps 3 through 7 for the Network, E-Mail, I-Fax, and
Advanced configuration menus.
+F4) from the main menu to go to the setup
(F2) and use the arrow keys to highlight the
O (F1). Choose another parameter from
K
The configuration process
C (F3).
HANGE
19
S
AVE