Remove A Service Blocking Rule [Router Mode] - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
For more information about the settings, see Add a service blocking rule for a custom
service or application [router mode] on page 96.
8. Click the Apply button.
Your settings are saved. The modified rule displays in the Service Table on the Block
Services page.

Remove a service blocking rule [router mode]

If the AP is in router mode, you can remove a service blocking rule that you no longer
need.
To remove a service blocking rule:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
The Block Services page displays.
5. In the Service Table, select the radio button for the rule.
6. Click the Delete button.
The rule is removed from the Service Table. Custom rules are deleted.
Security, Firewall, and Access
Rules
99 User Manual