Set Up An Ipv6 6Rd Internet Connection [Router Mode] - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
indicated by the underline (_) under the IPv6 address. If no address is acquired, the
field displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
• Auto. Your AP uses any remote relay router that is available on the Internet. This
is the default setting.
• Static IP Address. Enter the static IPv4 address of the remote relay router. Your
IPv6 ISP usually provides this address.
7. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns these addresses.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
8. In the LAN Setup section, select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCPv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the AP assigns IPv6 addresses to the devices on your home
network (the LAN).
9. (Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the AP's LAN interface.
If you do not specify an ID here, the AP generates one automatically from its MAC
address.
10. Select an IPv6 Filtering radio button:
• Secured. In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
• Open. In open mode, the router inspects UDP packets only.
11. Click the Apply button.
Your settings are saved.

Set up an IPv6 6rd Internet connection [router mode]

The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider's
IPv4 network. 6rd (also referred to as IPv6 rapid deployment) uses the service provider's
own IPv6 address prefix. This limits the operational domain of 6rd to the service provider's
Manually Set Up Internet
Settings [Router Mode]
54 User Manual