Remove A Port Triggering Rule [Router Mode]; Specify The Time-Out For Port Triggering [Router Mode] - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Remove a port triggering rule [router mode]

If the AP is in router mode, you can remove a port triggering rule that you no longer
need.
To remove a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the service or
application name.
7. Click the Delete Service button.
The rule is removed from the Port Triggering Portmap Table. If you want to reinstate
the rule, you must redefine it.

Specify the time-out for port triggering [router mode]

The time-out period for port triggering controls how long the inbound ports stay open
when the AP detects no activity. (The AP must be in router mode.) A time-out period is
required because the AP cannot detect when the service or application terminates.
To specify the time-out for port triggering:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
Port Forwarding and Port
Triggering [Router Mode]
221 User Manual