NETGEAR WiFi 6 AX1800 User Manual page 151

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
(Continued)
Field
IP Subnet Mask
DHCP Lease Time
Field
Internet Port
To change these settings, see, Use the Setup Wizard [router mode] on page 41 or Manually set up the AP Internet
connection [router mode] on page 42.
MAC Address
IP Address
Connection
IP Subnet Mask
Domain Name Server
WAN Preference
Field
Wireless Settings (2.4GHz) or Wireless Settings (5GHz )
To change these settings, see Basic WiFi and Radio Features on page 63 and Advanced WiFi and Radio Features
on page 190.
Name
Region
Channel
Mode
Maintain and Monitor
Description
The IP subnet mask that applies to all four AP LAN ports. For more information,
see Change the LAN IP address and subnet settings [router mode] on page 114.
The DHCP lease time. For more information, see Manage the DHCP server address
pool [router mode] on page 115.
Description
The MAC address that applies to the AP WAN (Internet) port.
The WAN IP address that the AP receives from your ISP (through your modem) or
the WAN IP address that you manually configured.
The type of Internet connection that the AP uses, which can be DHCP (the default
setting), Static IP, PPPoE, PPTP, or L2TP.
The IP subnet mask that the AP uses.
The IP address of the Domain Name System (DNS) server that the AP uses.
This field always shows Internet Port (1 Gbps).
Description
The name of the SSID (see Set up or change an open or secure WiFi network on
page 64).
The country and region in which the AP is being used (see Change the region of
operation on page 191).
The channel that the radio uses (see Change the channel for a radio on page 196).
The WiFi throughput mode that the radio uses (see Change the WiFi throughput
mode for a radio on page 197).
151 User Manual