Remove A Wifi Client From An Access Control List - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
The page that displays shows the Connection List - 2.4GHz table and the Connection
List - 5GHz table.
5. To block a connected WiFi device, do the following:
a. Click the associated Block button in the Block column on the right.
A pop-up window opens.
b. Click the OK button.
The WiFi device no longer displays on the page. An ACL that denies the MAC
address of the WiFi device is automatically added to the user WiFi network from
which you blocked the WiFi device. This ACL denies the WiFi device access to
the user WiFi network but allows access to all other WiFi devices. (For more
information, see Manage access to a user WiFi network based on a client's MAC
address on page 56.)
Remove a WiFi client from an access control
list
Removing the MAC address of a WiFi client from an access control list (ACL) can either
provide access or block access to the user WiFi network, depending on the type of ACL:
• Removing allows access: This applies in the following two situations:
- You manually blocked a WiFi client or connection from a user WiFi network.
- You set up an ACL that denies all WiFi clients in the ACL access to the user WiFi
network.
Removing the MAC address from the ACL allows the client access to the user WiFi
network.
• Removing blocks access: You set up an ACL that allows all WiFi clients in the ACL
access to the user WiFi network. Removing the MAC address from the ACL denies
the client access to the user WiFi network.
To remove a WiFi client from an ACL for a user WiFi network:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
Manage Advanced WiFi Settings 59 User Manual