Router Mode: Remove A Service Blocking Rule - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Security > Block Services.
The Block Services page displays.
6. In the Service Table, select the radio button for the rule.
7. Click the Edit button.
The Edit Services Blocking page displays.
8. Change the settings.
For more information about the settings, see Router mode: Add a service blocking
rule for a custom service or application on page 91.
9. Click the Apply button.
Your settings are saved. The modified rule displays in the Service Table on the Block
Services page.

Router mode: Remove a service blocking rule

You can remove a service blocking rule that you no longer need.
To remove a service blocking rule:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
Manage the Firewall and
Security
94 User Manual