Use Wps With The Pin Method - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
7. Click the button (that is, the green icon) onscreen.
8. Within two minutes, press the WPS button on the WiFi device, or follow the WPS
instructions that came with the device.
The WPS process automatically sets up the device with the WiFi passphrase and
connects the device to the Wireless 1 network of the AP.
9. To verify that the WiFi device is connected to the AP's Wireless 1 network, select
BASIC > Attached Devices.
The WiFi device displays on the page.

Use WPS with the PIN method

To use the PIN method to connect a WiFi device to the AP's Wireless 1 network, you
must know the PIN of the WiFi device that you are trying to connect.
To join the AP's Wireless 1 network using WPS with the PIN method:
1. Get the PIN of the WiFi device that you want to connect to the Wireless 1 network.
2. Connect your computer or mobile device to the AP in one of the following ways
• Connect directly to the AP's WiFi network or LAN. (Applies to the AP in either
operation mode.)
• Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
3. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
4. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > WPS Wizard.
The Add WPS Client page displays and shows a description of the WPS method.
6. Click the Next button.
Basic WiFi and Radio Features 79 User Manual