Chapter 13 Advanced Wifi And Radio Features - NETGEAR WiFi 6 AX1800 User Manual

13
Advanced WiFi and Radio Features
This chapter describes how you can manage the advanced WiFi and radio features of
the AP. For information about the basic WiFi and radio settings, see Basic WiFi and
Radio Features on page 63.
Tip: If you want to change the settings of the AP's WiFi network, use a wired connection
to avoid being disconnected when the new WiFi settings take effect.
The chapter includes the following sections:
• Change the region of operation
• Manage 802.11ax and enable or disable OFDMA for a radio
• Enable or disable smart connect for the AP
• Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio
• Change the channel for a radio
• Change the WiFi throughput mode for a radio
• Change the transmission output power for a radio
• Add a WiFi schedule for a radio
• Enable or disable MU-MIMO
• Enable or disable explicit beamforming
• Enable or disable PMF
• Set up the AP as a WiFi Bridge to another device
• Change the CTS/RTS threshold and preamble mode for a radio
Note: In this chapter, we refer to the access point as the AP.
190