Enable Or Disable The Automatic Update Of The Performance Optimization Database - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
4. Select BASIC > Quality of Service.
The QoS Setup page displays. By default, Quality of Service (QoS) is enabled, and
the Enable QoS check box is selected. By default, the Let Speedtest detect my
Internet bandwidth radio button is selected.
5. To find out what bandwidths your Internet connection supports, click the Take A
Speedtest button.
The speed test checks the AP download and uplink bandwidth, sets the detected
bandwidths, and displays the results on the page.
6. Select the I want to define my Internet bandwidth radio button.
A pop-up windows displays.
7. Click the OK button.
The fields for manual configuration display.
8. In the Download Speed (Mbps) field, enter the Internet download speed in Mbps.
You can use decimal numbers.
9. In the Upload Speed (Mbps) field, enter the Internet upload speed in Mbps.
You can use decimal numbers.
10. Click the Apply button.
A pop-up windows displays.
11. Click the OK button.
Your settings are saved.
For information about bandwidth utilization by device and application, see Display
the devices currently on the AP network and change device information on page
158.
Enable or disable the automatic update of
the Performance Optimization Database
The AP uses a Performance Optimization Database that includes the most popular
applications and services for the implementation of dynamic QoS. By default, the AP
automatically updates this database. You can turn off this feature and manually update
the database.
Optimize Performance 107 User Manual