Table of Contents
Advertisement
System Location
A text string describing the physical location of an SNMP man-
aged node (for example,
Auth. Fail Traps Sent
(
DISABLED, ENABLED
When enabled, the TSU 120 issues an SNMP trap when any
SNMP request is received with an invalid community name.
Can be used for security purposes.
Poll Link Status Traps Sent
(
DISABLED
the TSU 120 sends an SNMP trap whenever a device config-
ured to be polled fails to respond. When the device begins
responding to polls, a poll link-up trap is sent. The format of
the traps are defined in the agent MIB.
Ping IP Host
Allows the user to Ping a specific IP address.
Telnet/Terminal Timeout
The TSU 120 terminates a TELNET or Terminal session if no
activity is detected for this length of time. Only one TELNET or
Terminal session may be active at one time. This timeout pre-
vents an unattended session from blocking interactive access to
the agent. The default value is five minutes.
Telnet/Terminal Password
This option allows modification of the password required for
entry into a TELNET or Terminal session. The default value is
ADTRAN.
Exit
Returns to the TSU 120 Main menu.
61202129L1-1
SECOND FLOOR PBX ROOM
: defaults to
,
, defaults to
ENABLED
TSU 120 User Manual
Chapter 8. Telnet/Terminal Menus
)
DISABLED
). When enabled,
DISABLED
).
8-9
Advertisement
Table of Contents
