Table of Contents
Advertisement
Chapter 3. Operation
DSU/DSX Status
The DSU/DSX status LEDs display the operational condition
of the Nx56/64 and DSX-1 parts included in the TSU 120. It
also reflects the status of the DBU in the TSU 120e.
OK (
T
EST
(
YELLOW
A
LARM
Module Status
The module status LEDs display the operational condition of
ports installed in the option slots.
OK (
T
EST
(
YELLOW
3-4
Indicates the operation is in the normal mode
)
GREEN
and no errors have been detected.
Indicates that one of the interfaces is operating
in a test mode. This includes a self-test or a test
)
loopback. When lighted, this LED also indicates
that normal data flow is not occurring in at least
one of the module ports.
(
)
Indicates an alarm condition has been detected.
RED
When the alarm condition is no longer valid, the
OK LED activates (turns on). To view an alarm
condition, select the active alarm menu item or
select Alarm by pressing
conditions have been corrected, the alarm
which caused the activation of the Alarm LED
can be viewed under the Unit History Menu.
) Indicates the operation is in the normal mode
GREEN
and no errors have been detected.
Indicates that one of the interfaces is operating
in a test mode. This includes a self-test or a test
)
loopback. When lighted, this LED also indicates
that normal data flow is not occurring in at least
one of the module ports.
TSU 120 User Manual
. If the alarm
Shift+8
61202129L1-1
Advertisement
Table of Contents
