Chapter 6. Utility Menu
Pressing any key after entering a passcode causes the unit to
return to the previous active menu. In this case it returns to
2)
rate.
Change/Set a Passcode
The passcode can be changed or set at any time or eliminated
altogether through the Utility Menu item
procedure requires the current passcode (if one is established)
for operation.
The passcode can only be entered by using numbers. After
entering the desired passcode, press
Set a null passcode at the
Enter
grants unlimited access.
Passcode Automatic Time-out
For added security protection the unit is equipped with an
automatic time-out for operation with the password. After ten
minutes of inactivity, the unit reverts to limited access opera-
tion. To make changes in the configuration, the passcode can be
reentered.
If the passcode number is lost, contact ADTRAN Customer Ser-
vice for assistance.
No Passcode Desired
At the
Enter
need to enter a password for subsequent use and proceeds to
the
Unit ID
This menu is used to access the current Unit ID setting. View-
ing is available in limited-access mode. Editing or changing the
Unit ID requires the use of a password, as in editing mode. Unit
identification numbers must be between
6-4
, 2)
, 1)
CONFIG
UNIT
CTL PORT RATE
without any numbers. This sets a null passcode and
N
P
EW
ASSCODE
without any numerical entry. The system nullifies the
prompt.
U
ID
NIT
TSU 120 User Manual
to permit changing the data
,
Enter
3)
SET PASSCODE
prompt (in the Set Passcode menu), press
. This
3)
SET PASSCODE
.
menu by pressing
and
.
2
999
61202129L1-1